PRODUCTS

‹

›

‹

  • HRB400 HRB500 Deformed Rebar
  • HRB400 HRB500 Deformed Rebar
  • HRB400 HRB500 Deformed Rebar
  • HRB400 HRB500 Deformed Rebar
  • HRB400 HRB500 Deformed Rebar
  • HRB400 HRB500 Deformed Rebar

›

HRB400 HRB500 Deformed Rebar
Rebar is a surface ribbed bar, also known as ribbed steel, usually with 2 longitudinal ribs and evenly spaced horizontal ribs along its length. The shape of the cross-rib is spiral, herringbone and crescent-shaped. The nominal diameter is expressed in millimetres. The regular diameter of reinforcing bars are 8-50 mm and the recommended diameters are 8, 12, 16, 20, 25, 32 and 40 mm. Ribbed bars are mainly subjected to tensile stresses in concrete. Steel rebar has a greater bonding capacity with the concrete due to the ribs and is therefore better able to withstand the effects of external forces. It is used in a wide range of building structures, especially in large, heavy, light thin-walled and high-rise structures.
Inquiry Now

Product Description

Rebar is the common name for hot rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar is composed of HRB and the minimum yield point of the grade, and H, R, and B are the first letters of the three words Hot rolled, Ribbed, and Bars respectively.

Rebars are usually formed with a surface which is patterned (known as a deformed bar) to make a better adherence with the concrete spilled around it.No specific or special patterns are there for deforming, however, the number, spacing, and the height of the marks are standardized and integrated into the primary debar. In addition, there are plain bars which are used in the most specific and definite ways, only. Owing to the fact that rebar holds the concrete in a compact state, it is known as a tensioning material. when it comes into the compression, concrete is a very tough and strong material, but it almost has no strength where it comes to carrying tensile loads. To overcome this, rebar casts in concrete to carry the loads.

Product NameSteel Rebar
Diameter0.8mm-5.5mm
6mm/6.5mm/8mm/10mm
12mm/14mm/16mm/18mm/20mm/22mm/25mm/28mm/32mm/36mm/40mm/50mm
Length6m or as Customer′s actual requirements
StandardASTM, AISI, JIS, GB, DIN, EN
GradeHPB235,HPB300,HRB335,HRB400,RRB400,HRB500,HRB600,etc
Section shapeSpiral Shape,Herringbone Shape,Crescent Shape
EndsPlain end(PE),Beveled end(BE);protected by plastic caps on both ends,etc.
TechniqueCold rolled, Hot rolled, Cold-Drawn, Hot Forged
Surface Treatment1. Galvanized2. PVC, Black and color painting3. Transparent oil, anti-rust oil4. According to the client's requirement
PackingNeutral standard export seaworthy packing or as required
Seaworthy packing20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) ;about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) ;about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) ;about 68CBM

Product Display

Carbon Steel Rebar.jpg


FAQ

1、Does the product support customization？


Yes, we can customize it. You just need to inform our staff of the material, specific specifications and other requirements of the product you need.

 

2、How can I order it？
Contact customer service, email or message, etc.

 

3、Where can I get a good price？
Contact us and we will give you a reasonable price.

 

4、What is the lead time?
Usually 7-15 days, depends on the order quantity.

 

5、Is there 1:1 customer service support?
Yes, we support 1:1 customer service.

 

6、Is there a postage charge?
Yes, you need to pay the freight according to the quantity of your product.

 

7、What are the modes of transportation?
By sea, air or rail.

 

8、Terms of payment?
30%TT in advance, 70% balance before shippment.

Online Message

SUBMIT

Recommended Products